Polysan

For Complete Disinfection
Iodophor containing ‘Tamed Iodine” – Board spectrum Disinfectant
For complete disinfection – Hospitals, Veterinary and Food Processing Industry

ADVANTAGES OF POLYSAN

  • Active Ingredient : Alkyl phenoxy polyethoxy, ethanoliodine complex. Avaiable (titratable) iodine 1.6% minimum. POLYSAN is fast acting and non-selective. It covers a wide-spectrum of effectiveness and protection against wide variety of disease-causing agents, such as bacteria, spores, viruses, molds, protozoa, fungi, yeast and other pathogens. POLYSAN has residual anti-bacterial effect which last four days or more.
  • Safe : Iodine in the form of iodophor in POLYSAN is effective even when available in very minute quantity, such as 0.0075% (75 ppm) or less. In this form iodine is non-toxic and non-irritating, practically non-staining and safe-when used as directed.
  • Economical : POLYSAN is supplied in highly concentrated form. For most uses only 0.5% solution of POLYSAN in water is sufficient – 1 litre of POLYSAN will provide 200 litres of use-solution for general disinfection.
  • Self-Indicator : POLYSAN has the unique distinction of indicating its own germicidal activity. When used in recommended dilution, the solution is of a rich amber colour. In use, the colour fades as the iodine-complex kills organisms and iodine gets used up. However, as long as the amber colour remains in the solution, germicidal action continues. The user may be certain at all times that the disinfectant solutions retains the ability to kill most organisms quickly and completely. In case of many other disinfectants the smell persists beyond their germicidal activity cease and thereby misguiding the user.

APPLICATIONS

Polysan All Purpose Disinfectant For Hospital Use. It can be used from housekeeping uses, such as walls, floors and other surfaces, to the operating theatre and surgical wards. Some of its specific uses are listed below :

  • General disinfection : particularly in hospitals that have areas devoted to contagious diseases like tuberculosis, poliomylitis. Wall, furniture and all other surfaces including dishes, utensils etc. Disinfection of hospital kitchens, cafeterias and lunchrooms with stainless steel equipment, refrigerators, kettles, receptacles, refuse areas, etc.
  • Hospital equipments : such as thermometers, bedpans, urinals
  • Surgiacal instruments : for disinfection of scissors, forceps, rubber gloves, etc.
  • Morgue : disinfection of operating tables, refrigerators and general cleaning in the area.
  • Laboratories : such as bacteriology, pathology and chemistry (not applicable in chemistry labs, performing protein bound iodine studies).
  • Animal rooms and cages : in hospital large enough to have research facilities, disinfection is swift and sure – also reduce the animal odours.
  • Operating rooms and maternity rooms : for table, instruments and equipment.
  • Polysan Pre-Operative Scrub : to be prepared as given in DILUTION CHART. This is highly recommended for use as microbiocidal skin cleanser and as skin degerming agent. Also useful as for pre-operating and post-operative scrub.
  • Family Planning Centers : some of these centres are located outside regular hospitals or work as mobile units, chances of infection at such Family Planning Centres is more than in regular hospitals. POLYSAN being an all-purpose, disinfectant, is ideally suited for this.
  • Veterinary Use : POLYSAN can be used for general hygiene to prevent spread of infection, washing of odour and prevention of MASTITIS as well as in poultry farms. POLYSAN is recommended for skin antisepsis, footrot in sheep, orf, ringworm, foot and mouth disease and the general treatment of indeterminate dermatitis.
  • Schools, Public Places : POLYSAN being a germicide-cum-detergent, can be effectively and economically used for daily sanitary procedures. It is specifically useful for workers’ locker rooms, wash and shower rooms (prevents spread of athlete’s foot infection), cafeteria, public and private lavatories. Use of POLYSAN will inhibit the possible cross infection by the disease-causing organisms.
  • Food Processing Plants, Breweries, Hatcheries And Sugar Plants :
    POLYSAN can be used effectively for control of undesirable bacterial growth and for sanitizing the equipment.

DIRECTIONS FOR USE

POLYSAN is highly concentrated and only 0.5% solution in water is used as a general-purpose disinfectant and cleanser (5 ml of POLYSAN: 1 litre of water, 75 ppm available iodine). For porous surface or those difficult to clean, especially molds and fungi use 1% solution (10 ml of POLYSAN: 1 LITRE of water, 150 ppm available iodine). The USE SOLUTION will have a dark-brown colour and with usage the fading of colour. Indicates germicidal property being used up. When colour fades away, prepare fresh solution. The surface article to be disinfected should be in through contact with solution for about 5 minutes.

  • General Instructions : POLYSAN should be diluted with water at room temperature. Hot water, soap or other detergents should not be used with POLYSAN. If required Sodium nitrite should be added as indicated in the dilution chart for instrument disinfection.
  • Polysan  : Should not be used with copper, brass or poorly plated or worn-out articles of metal. POLYSAN solution will not affect articles of stainless steel or aluminum or other properly plated metals.
    Give below is a dilution chart for reference.

POLYSAN DILTUION CHART

Usuage Dilution Polysan Water Polysan In Solution percentage Available titratable iodine parts per million (ppm)
GENERAL DISINFECTION
  • Mopping of walls, floors and furniture in ward, kitchens, cafeterias and tables
  • Beside trays, bedpans, urinals, toilet seats etc.
  • Thermometer disinfection (contact time 2-5 minutes)
  • Hand washing and pre-operative cleaning and disinfection of part and skin in case of vasectomy etc.
1 : 200 ½% 75 ppm
OPERATIVE ROOMS
  • Surgical gloves,catheters, drainage tubes, masks, anaesthesia equipment overhead lights etc. (contact time: 5-10 minutes)
  • Spraying, mopping of floors, and walls operating tables, kick pans etc.
1 : 10 1% 150 ppm
PRE-OPERATIVE SCRUB
  • Sterlization of Surgeons hands
  • Pre-operative skin painting, pre surgical scrub in Vasectomy and tubectomy
If spirit not available use 10% solution of POLYSAN in water only. POLYSAN Spirit( Ethylalcohol denatured) water (distilled) Total Scrub
10 ml 50 ml 40 ml 100 ml 10% 1500 ppm 0.15% iodine
CARE OF INSTRUMENTS
  • Immersion of instruments after use to prevent spread of infection (add 2gm of sodium nitrite per litre of solution)
  • Storage of already-sterlised instruments
  • Inhalation therapy and anesthesia equipment ( contact time : 5-10 minutes)
2 : 100 1 : 100 1 : 200 2% 1% ½% 300 ppm 150 ppm 75 ppm
INSTRUMENTS WHERE AUTOCLAVING IS NOT POSSIBLE
  • Intra Uterine Device, loop and loop introducer, menstrual regulation kit, plastic cannuals and disinfection of catgut tubes
  • Chemical sterilization of special surgical and diagnostic instruments ( 2gm of sodium nitrite per litre of solution immersion time : 2 hours
  • For instruments having dried and highly resistant spares ( add 6gm. Of Sodium Nitrite per litre of solution ) Time: 18 hours
1 : 100 3 : 100 5 : 100 1% 5% 3% 150 ppm 450 ppm 750 ppm